Monitoring device for my cars battery with the ability to broadcast the voltage through TheThingsNetwork using LoRaWAN

IOT MotionDetect Android Things Project

This UIFlow is intended to utilize the M5Stack Core + GPS module + LoRaWAN module to provide tracking via the Helium Network.

An IoT application for visualizing flooding in Norfolk, Virginia

Using Apache Camel to Store and Visualize Data From The Things Network using Grafana and InfluxDB

(WIP) LoRa GPS tracker with custom hardware and firmware: Custom STM32F103C8 based PCB with RFM 95 LoRa transceiver and a ublox SAM-M8Q GPS receiver

Reference setup for iC880a gateways running The Things Network. Have a look at the attached website with instructions in Spanish on how we used this repo to set one of our community gateways. https://www.thethingsnetwork.org/community/sevilla/post/setas-revueltas-gateway-ic880a-ch2i-raspberrypi

Gateways and sample measurements of TTN activity in Zürich

a lorawan encoder/decoder library with support for csv input (hex, base64).

This project is an intelligent IoT wildfire prediction system using the STM32WLE5JC LoRa E5 board and BME680 sensor. It collects temperature, humidity, pressure, and gas data, sends it via LoRaWAN to a Dragino Gateway and The Things Network (TTN), then transfers it to a Django server through MQTT for real-time monitoring, storage, and geolocation

slightly broken prometheus exporter for ttn gateways