DFRobot_RTU

中文版

Modbus RTU library for Arduino. The supported modbus commands are as follows：

0x01: Read one or multiple coils register;
0x02: Read one or multiple discrete inputs register;
0x03: Read one or multiple holding register;
0x04: Read one or multiple input register;
0x05: Write a coils register;
0x06: write a holding register;
0x0F: Write multiple coils register;
0x10: Write multiple holding register;

Product Link（链接到英文商城）

Summary

This is a modbus RTU libary for Arduino by DFRobot.

Connected

Hardware conneted table

Sensor	MCU
VCC	5V
GND	GND
RX	connected to the UART TX pin of MCU
TX	connected to the UART RX pin of MCU

Installation

To use this library, first download the library file, paste it into the \Arduino\libraries directory, then open the examples folder and run the demo in the folder.

Methods

/**
 * @brief DFRobot_RTU abstract class constructor. Construct serial port.
 * @param s:  The class pointer object of Abstract class， here you can fill in the pointer to the serial port object.
 * @param dePin: RS485 flow control, pull low to receive, pull high to send.
 */
DFRobot_RTU(Stream *s,int dePin);
DFRobot_RTU(Stream *s);
~DFRobot_RTU()

/**
 * @brief Set receive timeout time, unit ms.
 * @param timeout:  receive timeout time, unit ms, default 100mss.
 */
void setTimeoutTimeMs(uint32_t timeout = 100);

/**
 * @brief Read a coils Register.
 * @param id:  modbus device ID. Range: 0x00 ~ 0xF7(0~247), 0x00 is broadcasr address, which all slaves will process broadcast packets, 
 * @n          but will not answer.
 * @param reg: Coils register address.
 * @return Return the value of the coils register value.
 * @n      true: The value of the coils register value is 1.
 * @n      false: The value of the coils register value is 0.
 */
  bool readCoilsRegister(uint8_t id, uint16_t reg);

/**
 * @brief Read a discrete input register.
 * @param id:  modbus device ID. Range: 0x00 ~ 0xF7(0~247), 0x00 is broadcasr address, which all slaves will process broadcast packets, 
 * @n          but will not answer.
 * @param reg: Discrete input register address.
 * @return Return the value of the discrete input register.
 */
uint16_t readDiscreteInputsRegister(uint8_t id, uint16_t reg);

/**
 * @brief Read a holding Register.
 * @param id:  modbus device ID. Range: 0x00 ~ 0xF7(0~247), 0x00 is broadcasr address, which all slaves will process broadcast packets, 
 * @n          but will not answer.
 * @param reg: Holding register address.
 * @return Return the value of the holding register value.
 */
uint16_t readHoldingRegister(uint8_t id, uint16_t reg);

/**
 * @brief Read a input Register.
 * @param id:  modbus device ID. Range: 0x00 ~ 0xF7(0~247), 0x00 is broadcasr address, which all slaves will process broadcast packets, 
 * @n          but will not answer.
 * @param reg: input register address.
 * @return Return the value of the input register value.
 */
  uint16_t readInputRegister(uint8_t id, uint16_t reg);

/**
 * @brief Write a coils Register.
 * @param id:  modbus device ID. Range: 0x00 ~ 0xF7(0~247), 0x00 is broadcasr address, which all slaves will process broadcast packets, 
 * @n          but will not answer.
 * @param reg: Coils register address.
 * @param flag: The value of the register value which will be write, 0 ro 1.
 * @return Exception code:
 * @n      0 : sucess.
 * @n      1 or eRTU_EXCEPTION_ILLEGAL_FUNCTION : Illegal function.
 * @n      2 or eRTU_EXCEPTION_ILLEGAL_DATA_ADDRESS: Illegal data address.
 * @n      3 or eRTU_EXCEPTION_ILLEGAL_DATA_VALUE:  Illegal data value.
 * @n      4 or eRTU_EXCEPTION_SLAVE_FAILURE:  Slave failure.
 * @n      8 or eRTU_EXCEPTION_CRC_ERROR:  CRC check error.
 * @n      9 or eRTU_RECV_ERROR:  Receive packet error.
 * @n      10 or eRTU_MEMORY_ERROR: Memory error.
 * @n      11 or eRTU_ID_ERROR: Broadcasr address or error ID
 */
  uint8_t writeCoilsRegister(uint8_t id, uint16_t reg, bool flag);
  
/**
 * @brief Write a holding register.
 * @param id:  modbus device ID. Range: 0x00 ~ 0xF7(0~247), 0x00 is broadcasr address, which all slaves will process broadcast packets, 
 * @n          but will not answer.
 * @param reg: Holding register address.
 * @return Exception code:
 * @n      0 : sucess.
 * @n      1 or eRTU_EXCEPTION_ILLEGAL_FUNCTION : Illegal function.
 * @n      2 or eRTU_EXCEPTION_ILLEGAL_DATA_ADDRESS: Illegal data address.
 * @n      3 or eRTU_EXCEPTION_ILLEGAL_DATA_VALUE:  Illegal data value.
 * @n      4 or eRTU_EXCEPTION_SLAVE_FAILURE:  Slave failure.
 * @n      8 or eRTU_EXCEPTION_CRC_ERROR:  CRC check error.
 * @n      9 or eRTU_RECV_ERROR:  Receive packet error.
 * @n      10 or eRTU_MEMORY_ERROR: Memory error.
 * @n      11 or eRTU_ID_ERROR: Broadcasr address or error ID
 */
uint8_t writeHoldingRegister(uint8_t id, uint16_t reg, uint16_t val);

/**
 * @brief Read multiple coils Register.
 * @param id:  modbus device ID. Range: 0x00 ~ 0xF7(0~247), 0x00 is broadcasr address, which all slaves will process broadcast packets, 
 * @n          but will not answer.
 * @param reg: Coils register address.
 * @param regNum: Number of coils Register.
 * @param data: Storage register worth pointer.
 * @param size: Cache size of data.
 * @return Exception code:
 * @n      0 : sucess.
 * @n      1 or eRTU_EXCEPTION_ILLEGAL_FUNCTION : Illegal function.
 * @n      2 or eRTU_EXCEPTION_ILLEGAL_DATA_ADDRESS: Illegal data address.
 * @n      3 or eRTU_EXCEPTION_ILLEGAL_DATA_VALUE:  Illegal data value.
 * @n      4 or eRTU_EXCEPTION_SLAVE_FAILURE:  Slave failure.
 * @n      8 or eRTU_EXCEPTION_CRC_ERROR:  CRC check error.
 * @n      9 or eRTU_RECV_ERROR:  Receive packet error.
 * @n      10 or eRTU_MEMORY_ERROR: Memory error.
 * @n      11 or eRTU_ID_ERROR: Broadcasr address or error ID
 */
  uint8_t readCoilsRegister(uint8_t id, uint16_t reg, uint16_t regNum, uint8_t *data, uint16_t size);

/**
 * @brief Read multiple discrete inputs register.
 * @param id:  modbus device ID. Range: 0x00 ~ 0xF7(0~247), 0x00 is broadcasr address, which all slaves will process broadcast packets, 
 * @n          but will not answer.
 * @param reg: Discrete inputs register. address.
 * @param regNum: Number of coils Register.
 * @param data: Storage register worth pointer.
 * @param size: Cache size.
 * @return Exception code:
 * @n      0 : sucess.
 * @n      1 or eRTU_EXCEPTION_ILLEGAL_FUNCTION : Illegal function.
 * @n      2 or eRTU_EXCEPTION_ILLEGAL_DATA_ADDRESS: Illegal data address.
 * @n      3 or eRTU_EXCEPTION_ILLEGAL_DATA_VALUE:  Illegal data value.
 * @n      4 or eRTU_EXCEPTION_SLAVE_FAILURE:  Slave failure.
 * @n      8 or eRTU_EXCEPTION_CRC_ERROR:  CRC check error.
 * @n      9 or eRTU_RECV_ERROR:  Receive packet error.
 * @n      10 or eRTU_MEMORY_ERROR: Memory error.
 * @n      11 or eRTU_ID_ERROR: Broadcasr address or error ID
 */
uint8_t readDiscreteInputsRegister(uint8_t id, uint16_t reg, uint16_t regNum, uint8_t *data, uint16_t size);

/**
 * @brief Read multiple Holding register.
 * @param id:  modbus device ID. Range: 0x00 ~ 0xF7(0~247), 0x00 is broadcasr address, which all slaves will process broadcast packets, 
 * @n          but will not answer.
 * @param reg: Holding register.
 * @param data: Storage register worth pointer.
 * @param size: Cache size.
 * @return Exception code:
 * @n      0 : sucess.
 * @n      1 or eRTU_EXCEPTION_ILLEGAL_FUNCTION : Illegal function.
 * @n      2 or eRTU_EXCEPTION_ILLEGAL_DATA_ADDRESS: Illegal data address.
 * @n      3 or eRTU_EXCEPTION_ILLEGAL_DATA_VALUE:  Illegal data value.
 * @n      4 or eRTU_EXCEPTION_SLAVE_FAILURE:  Slave failure.
 * @n      8 or eRTU_EXCEPTION_CRC_ERROR:  CRC check error.
 * @n      9 or eRTU_RECV_ERROR:  Receive packet error.
 * @n      10 or eRTU_MEMORY_ERROR: Memory error.
 * @n      11 or eRTU_ID_ERROR: Broadcasr address or error ID
 */
uint8_t readHoldingRegister(uint8_t id, uint16_t reg, void *data, uint16_t size);

/**
 * @brief Read multiple Input register.
 * @param id:  modbus device ID. Range: 0x00 ~ 0xF7(0~247), 0x00 is broadcasr address, which all slaves will process broadcast packets, 
 * @n          but will not answer.
 * @param reg: Input register.
 * @param data: Storage register worth pointer.
 * @param regNum: register numbers.
 * @return Exception code:
 * @n      0 : sucess.
 * @n      1 or eRTU_EXCEPTION_ILLEGAL_FUNCTION : Illegal function.
 * @n      2 or eRTU_EXCEPTION_ILLEGAL_DATA_ADDRESS: Illegal data address.
 * @n      3 or eRTU_EXCEPTION_ILLEGAL_DATA_VALUE:  Illegal data value.
 * @n      4 or eRTU_EXCEPTION_SLAVE_FAILURE:  Slave failure.
 * @n      8 or eRTU_EXCEPTION_CRC_ERROR:  CRC check error.
 * @n      9 or eRTU_RECV_ERROR:  Receive packet error.
 * @n      10 or eRTU_MEMORY_ERROR: Memory error.
 * @n      11 or eRTU_ID_ERROR: Broadcasr address or error ID
 */
  uint8_t readInputRegister(uint8_t id, uint16_t reg, void *data, uint16_t size);

/**
 * @brief Read multiple Holding register.
 * @param id:  modbus device ID. Range: 0x00 ~ 0xF7(0~247), 0x00 is broadcasr address, which all slaves will process broadcast packets, 
 * @n          but will not answer.
 * @param reg: Holding register.
 * @param data: Storage register worth pointer.
 * @param regNum: register numbers.
 * @return Exception code:
 * @n      0 : sucess.
 * @n      1 or eRTU_EXCEPTION_ILLEGAL_FUNCTION : Illegal function.
 * @n      2 or eRTU_EXCEPTION_ILLEGAL_DATA_ADDRESS: Illegal data address.
 * @n      3 or eRTU_EXCEPTION_ILLEGAL_DATA_VALUE:  Illegal data value.
 * @n      4 or eRTU_EXCEPTION_SLAVE_FAILURE:  Slave failure.
 * @n      8 or eRTU_EXCEPTION_CRC_ERROR:  CRC check error.
 * @n      9 or eRTU_RECV_ERROR:  Receive packet error.
 * @n      10 or eRTU_MEMORY_ERROR: Memory error.
 * @n      11 or eRTU_ID_ERROR: Broadcasr address or error ID
 */
  uint8_t readHoldingRegister(uint8_t id, uint16_t reg, uint16_t *data, uint16_t regNum);

/**
 * @brief Read multiple Input register.
 * @param id:  modbus device ID. Range: 0x00 ~ 0xF7(0~247), 0x00 is broadcasr address, which all slaves will process broadcast packets, 
 * @n          but will not answer.
 * @param reg: Input register.
 * @param data: Storage register worth pointer.
 * @param regNum: register numbers.
 * @return Exception code:
 * @n      0 : sucess.
 * @n      1 or eRTU_EXCEPTION_ILLEGAL_FUNCTION : Illegal function.
 * @n      2 or eRTU_EXCEPTION_ILLEGAL_DATA_ADDRESS: Illegal data address.
 * @n      3 or eRTU_EXCEPTION_ILLEGAL_DATA_VALUE:  Illegal data value.
 * @n      4 or eRTU_EXCEPTION_SLAVE_FAILURE:  Slave failure.
 * @n      8 or eRTU_EXCEPTION_CRC_ERROR:  CRC check error.
 * @n      9 or eRTU_RECV_ERROR:  Receive packet error.
 * @n      10 or eRTU_MEMORY_ERROR: Memory error.
 * @n      11 or eRTU_ID_ERROR: Broadcasr address or error ID
 */
  uint8_t DFRobot_RTU::readInputRegister(uint8_t id, uint16_t reg, uint16_t *data, uint16_t size)

/**
 * @brief Write multiple coils Register.
 * @param id:  modbus device ID. Range: 0x00 ~ 0xF7(0~247), 0x00 is broadcasr address, which all slaves will process broadcast packets, 
 * @n          but will not answer.
 * @param reg: Coils register address.
 * @param regNum: Numbers of Coils register.
 * @param data: Storage register worth pointer.
 * @param size: Cache size.
 * @return Exception code:
 * @n      0 : sucess.
 * @n      1 or eRTU_EXCEPTION_ILLEGAL_FUNCTION : Illegal function.
 * @n      2 or eRTU_EXCEPTION_ILLEGAL_DATA_ADDRESS: Illegal data address.
 * @n      3 or eRTU_EXCEPTION_ILLEGAL_DATA_VALUE:  Illegal data value.
 * @n      4 or eRTU_EXCEPTION_SLAVE_FAILURE:  Slave failure.
 * @n      8 or eRTU_EXCEPTION_CRC_ERROR:  CRC check error.
 * @n      9 or eRTU_RECV_ERROR:  Receive packet error.
 * @n      10 or eRTU_MEMORY_ERROR: Memory error.
 * @n      11 or eRTU_ID_ERROR: Broadcasr address or error ID
 */
  uint8_t writeCoilsRegister(uint8_t id, uint16_t reg, uint16_t regNum, void *data, uint16_t size);

/**
 * @brief Write multiple Holding Register.
 * @param id:  modbus device ID. Range: 0x00 ~ 0xF7(0~247), 0x00 is broadcasr address, which all slaves will process broadcast packets, 
 * @n          but will not answer.
 * @param reg: Holding register address.
 * @param data: Storage register worth pointer.
 * @param size: Cache size.
 * @return Exception code:
 * @n      0 : sucess.
 * @n      1 or eRTU_EXCEPTION_ILLEGAL_FUNCTION : Illegal function.
 * @n      2 or eRTU_EXCEPTION_ILLEGAL_DATA_ADDRESS: Illegal data address.
 * @n      3 or eRTU_EXCEPTION_ILLEGAL_DATA_VALUE:  Illegal data value.
 * @n      4 or eRTU_EXCEPTION_SLAVE_FAILURE:  Slave failure.
 * @n      8 or eRTU_EXCEPTION_CRC_ERROR:  CRC check error.
 * @n      9 or eRTU_RECV_ERROR:  Receive packet error.
 * @n      10 or eRTU_MEMORY_ERROR: Memory error.
 * @n      11 or eRTU_ID_ERROR: Broadcasr address or error ID
 */
uint8_t writeHoldingRegister(uint8_t id, uint16_t reg, void *data, uint16_t size);

/**
 * @brief Write multiple Holding Register.
 * @param id:  modbus device ID. Range: 0x00 ~ 0xF7(0~247), 0x00 is broadcasr address, which all slaves will process broadcast packets, 
 * @n          but will not answer.
 * @param reg: Holding register address.
 * @param data: Storage register worth pointer.
 * @param regNum: Number of coils Register..
 * @return Exception code:
 * @n      0 : sucess.
 * @n      1 or eRTU_EXCEPTION_ILLEGAL_FUNCTION : Illegal function.
 * @n      2 or eRTU_EXCEPTION_ILLEGAL_DATA_ADDRESS: Illegal data address.
 * @n      3 or eRTU_EXCEPTION_ILLEGAL_DATA_VALUE:  Illegal data value.
 * @n      4 or eRTU_EXCEPTION_SLAVE_FAILURE:  Slave failure.
 * @n      8 or eRTU_EXCEPTION_CRC_ERROR:  CRC check error.
 * @n      9 or eRTU_RECV_ERROR:  Receive packet error.
 * @n      10 or eRTU_MEMORY_ERROR: Memory error.
 * @n      11 or eRTU_ID_ERROR: Broadcasr address or error ID
 */
  uint8_t writeHoldingRegister(uint8_t id, uint16_t reg, uint16_t *data, uint16_t regNum);

Compatibility

MCU	SoftwareSerial	HardwareSerial
Arduino Uno	√	X
Mega2560	√	√
Leonardo	√	√
ESP32	X	√
ESP8266	√	X
micro:bit	X	X
FireBeetle M0	X	√
raspberry	X	√

History

Data 2021-07-17
Version V1.0

Credits

Written by(xue.peng@dfrobot.com), 2021. (Welcome to our website)

Name		Name	Last commit message	Last commit date
Latest commit History 42 Commits
examples		examples
python/raspberrypi		python/raspberrypi
src		src
LICENCE		LICENCE
README.md		README.md
README_CN.md		README_CN.md
keywords.txt		keywords.txt
library.properties		library.properties

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uh oh!

Repository files navigation

DFRobot_RTU

Product Link（链接到英文商城）

Table of Contents

Summary

Connected

Installation

Methods

Compatibility

History

Credits

About

Uh oh!

Releases

Packages

Contributors 6

Languages

License

DFRobot/DFRobot_RTU

Folders and files

Latest commit

History

Repository files navigation

DFRobot_RTU

Product Link（链接到英文商城）

Table of Contents

Summary

Connected

Installation

Methods

Compatibility

History

Credits

About

Topics

Resources

License

Uh oh!

Stars

Watchers

Forks

Releases

Packages 0

Contributors 6

Languages

Packages