Reduino

Write friendly Python. Get Arduino-ready C++. Upload Easily to MCUs.

---

Table of contents

• Overview
• Quick start
• The target() function (Required)
• API reference
  • Actuators
    • LED
    • RGB LED
    • Buzzer
    • Servo
  • Sensors
    • Button
    • Potentiometer
    • Ultrasonic
  • Communication
    • SerialMonitor
  • Utilities
    • sleep
    • map
• Supported Python features
• License

---

Overview

Reduino lets you write high-level Python that compiles into clean Arduino C++, then optionally uploads it to your board via PlatformIO.

---

Quick start

pip install Reduino
pip install platformio  # required for automatic uploads

Note

PlatformIO is only required for automatic build & upload. You can still transpile without it.

---

The target() function (Required)

Place target() at the very top of your script, immediately after imports. This is the entry point that tells Reduino to parse your entire file, transpile it to Arduino C++, and (optionally) upload it.

Parameter	Type	Default	Description
port	str	—	Serial port, e.g. "COM3" or "/dev/ttyACM0".
upload	bool	True	If True, compile & upload via PlatformIO. If False, only transpile.

Returns: str of the generated Arduino C++ source.

Minimal example (top-of-file target)

from Reduino import target
target("COM3")  # upload=True by default

# Your Reduino code below...

Example: Reduino structure explained

Reduino automatically splits your Python code into Arduino sections.

from Reduino import target
target("COM3")

from Reduino.Actuators import Led
led = Led(13)

while True:
    led.toggle()          # repeated code -> goes into void loop()

Generated Arduino structure (conceptually):

void setup() {
  pinMode(13, OUTPUT);
}

void loop() {
  digitalWrite(13, !digitalRead(13));
  delay(500);
}

Everything before while True: (declarations, prints, sensor setup, etc.) is placed inside setup(), and everything inside the while True loop is placed in loop().

Transpile only (no upload)

from Reduino import target
cpp = target("COM3", upload=False)
print(cpp)

# Your Reduino code below...

Important

target() reads the whole file text and generates code for everything below it. If upload=True, it also builds and flashes using a temporary PlatformIO project.

---

API reference

Actuators

LED

Method	Description
Led(pin=13)	Bind an LED to a digital/PWM pin.
on() / off()	Turn fully on/off.
toggle()	Flip state.
get_state()	True if on.
get_brightness() / set_brightness(v)	PWM 0–255.
blink(duration_ms, times=1)	Blink helper.
fade_in(step=5, delay_ms=10) / fade_out(step=5, delay_ms=10)	Smooth ramp.
flash_pattern(pattern, delay_ms=200)	Run pattern of 0 & 1s eg: [1,0,0,1,1,1].

Example

from Reduino import target
target("COM3")

from Reduino.Actuators import Led
from Reduino.Utils import sleep

led = Led(9)
led.set_brightness(128)
led.blink(200, times=3)
sleep(500)
led.off()

---

RGB LED

Method	Description
RGBLed(r_pin, g_pin, b_pin)	Bind RGB to three PWM pins.
set_color(r,g,b)	Set color (0–255 each).
on(r=255,g=255,b=255) / off()	White / off.
fade(r,g,b,duration_ms=1000,steps=50)	Transition to target color.
blink(r,g,b,times=1,delay_ms=200)	Blink with color.

Example

from Reduino import target
target("COM3")

from Reduino.Actuators import RGBLed
from Reduino.Utils import sleep

rgb = RGBLed(9, 10, 11)
rgb.set_color(0, 128, 255)
rgb.fade(255, 0, 0, duration_ms=1500)
sleep(300)
rgb.off()

---

Buzzer

Method	Description
Buzzer(pin=8, default_frequency=440.0)	Create buzzer.
play_tone(frequency, duration_ms=None)	Play tone.
stop()	Stop sound.
beep(frequency=None, on_ms=100, off_ms=100, times=1)	Repeated tone.
sweep(start_hz, end_hz, duration_ms, steps=10)	Sweep frequencies.
melody(name, tempo=None)	Play built-in melody.

Built-in melodies: success, error, startup, notify, alarm, scale_c, siren

Example

from Reduino import target
target("COM3")

from Reduino.Actuators import Buzzer
from Reduino.Utils import sleep

bz = Buzzer(8)
bz.melody("startup")
sleep(500)
bz.beep(frequency=880, on_ms=100, off_ms=100, times=3)
bz.stop()

---

Servo

Method	Description
Servo(pin=9, min_angle=0, max_angle=180, min_pulse_us=544, max_pulse_us=2400)	Create servo.
write(angle)	Move to degrees (clamped).
write_us(pulse)	Move by pulse width (clamped).

Example

from Reduino import target
target("COM3")

from Reduino.Actuators import Servo
from Reduino.Utils import sleep

s = Servo(9)
s.write(90)
sleep(500)
s.write(0)

---

Sensors

Button

Method	Description
Button(pin, on_click=None, state_provider=None)	Digital input w/ optional callback/provider.
is_pressed()	1 if pressed else 0.

Example

from Reduino import target
from Reduino.Actuators import Led
from Reduino.Sensors import Button

target("COM3")

led = Led(6)
btn = Button(7)
if btn.is_pressed():
    led.toggle()

---

Potentiometer

Method	Description
Potentiometer(pin="A0", value_provider=None)	Analog helper.
read()	0–1023 integer.

Example

from Reduino import target
from Reduino.Communication import SerialMonitor
target("COM3")

from Reduino.Sensors import Potentiometer

mon = SerialMonitor(9600 , "COM3")
pot = Potentiometer("A0")

while True:
    value = pot.read()
    mon.write(value)

---

Ultrasonic

Method	Description
Ultrasonic(trig, echo, sensor="HC-SR04", distance_provider=None, default_distance=0.0)	HC-SR04 factory.
measure_distance()	Distance in cm (handles timeouts/backoff).

Example

from Reduino import target
target("COM3")

from Reduino.Sensors import Ultrasonic
from Reduino.Utils import sleep

u = Ultrasonic(trig=9, echo=10)
d = u.measure_distance()
print(d)
sleep(60)

---

Communication

SerialMonitor

Method	Description
SerialMonitor(baud_rate=9600, port=None, timeout=1.0)	Host-side serial console.
connect(port)	Open serial (requires pyserial).
close()	Close port.
write(value)	Send text.
read()	Read text.

Example (host-side)

from Reduino import target
target("COM3")

from Reduino.Communication import SerialMonitor

mon = SerialMonitor(baud_rate=115200, port="COM4")

while True:
    mon.write("hello")
    mon.read()
    mon.close()

Note

pyserial is optional; only needed if you call connect().

---

Utilities

sleep

from Reduino import target
target("COM3")

from Reduino.Utils import sleep
sleep(250)  # ms

map

from Reduino import target
target("COM3")

from Reduino.Utils import map
mapped = map(512, 0, 1023, 0.0, 5.0)  # 2.5-ish
print(mapped)

---

Supported Python features

Reduino implements a pragmatic subset of Python that cleanly lowers to Arduino C++.

Control flow

• while True: ➜ Arduino loop()
• for x in range(...), including range(start, stop, step)
• if / elif / else, break, continue, try/except (mapped to C++ try/catch where used)

Variables & assignment

• Standard assignment and pythonic swap:

  a, b = b, a

• Multiple assignment & tuple unpacking

• Augmented ops (+=, -=, *=, etc.)

Collections

• Lists ([]), tuples (()), and membership checks (x in items)

• List comprehensions:

  squares = [i for i in range(10)]

• len() on strings, lists, and internal list type

Built-ins

• len(), abs(), max(), min()
• print() maps to serial printing in emitted code when serial is configured

Tip

Many constant expressions are folded at transpile time for smaller, faster C++.

---

License

Reduino is distributed under the GNU General Public License v3.0 (GPLv3).
You are free to use, modify, and distribute this software for personal or educational purposes,
as long as derivative works remain open-source and licensed under the same terms.

For commercial usage, redistribution, or integration into closed-source systems,
please contact me at arnavbajaj9@gmail.com for alternative licensing options.

See LICENSE for full details.

Star History