AVR128DB48 I2C_Host Example Component for CNano Explorer: I2C Proximity Sensor (Callbacks, Printf-errors)
The I2C Proximity Sensor Example, of the MCC Melody I2C Example Component (for the Curiosity Nano Explorer), is used here in the Callbacks implementation with the Printf with error handling visualization.
This example reads the value of the VCNL4200 proximity sensor on the Curiosity Nano Explorer, using the Printf with error handling visualization output. Every 250 ms, an LED and a Debug I/O pin are toggled. An appropriately formatted Printf string is then sent to the MPLAB® Data Visualizer.
The below image of the MPLAB Data Visualizer shows the application running, where proximityValue is displayed in a Printf string. Any I2C errors would also be displayed.
When running the application using the MPLAB Data Visualizer, you should see something similar to the following:
The following outlines the complete MPLAB Code Configuration (MCC) Melody configuration, including all the selected tasks implemented in this example.
Example Components are a tight integration of learning material directly into MCC. This allows users to conveniently place the configuration instructions side-by-side to the components they are configuring. For more information, refer to the MCC Melody Example Components introduction.
-
MPLAB® X IDE v6.25 or newer
-
MPLAB® XC8 v3.00 or newer
-
MPLAB® Code Configurator (MCC) Plug-in Version v5.6.2 or newer (Tools>Plugins>Installed, search: "MCC")
-
MPLAB® Data Visualizer Plug-in Version v1.4.1926 or newer (Tools>Plugins>Installed, search: "Data Visualizer")
-
MCC Melody I2C_Host Example Component for the Curiosity Nano Explorer v1.0.0 or newer
-
MCC Core v5.8.2 or newer
-
Single Page Application (SPA) Host v1.0.0 or newer
-
MCC Melody Core v2.9.1 or newer
Open the MCC Content Manager 
to verify the MCC Core and MCC Melody Core versions.
- AVR128DB48 Curiosity Nano (EV35L43A)
- Curiosity Nano Explorer (EV58G97A)